A surfboard doesn’t have to rule out van life. Storing one inside a campervan can work, but the board’s length, the space its bag takes up and the room available for a ceiling mount all affect whether it will fit.
It’s easy to see why the idea can feel tricky: standard vans are 1.40 to 1.90 metres high, while boards that can be difficult to fit inside range from 1.70 to 2.75 metres long. A 6’4 shortboard measures 193 centimetres, a 7’6 mini Malibu measures 231 centimetres and a 9’0 longboard measures 274 centimetres.
This guide explains how surfing and van life can work together, and what to consider before choosing an overhead storage layout. You’ll learn how to measure your board and bag against the usable space, how ceiling mounts affect headroom and everyday access, and how to protect your board while travelling. Plan around your van’s actual layout to make room for surfing without compromising the rest of your trip.
Key Takeaways
- Plan a ceiling mount around the van’s layout, available headroom and easy access to the board.
- Match rack capacity and spacing to your boards so they sit securely without disrupting daily use.
- Keep floor space clear by considering how board storage affects movement, seating and access to campervan essentials.
- Use suitable padding and careful positioning to reduce the risk of knocks, pressure points and friction damage.
- Measure the board bag as well as the board, then assess the full storage route through the van before settling on a layout.
Ceiling-mounted board storage
An overhead rack can keep a surfboard out of the living area, but it needs to suit the van’s internal layout. Measure the board, its bag and the usable ceiling space before choosing a position.
Start by mapping the board’s full length against the ceiling, then check where it would sit above doors, seats and walkways. A 9’0 longboard measures 274 centimetres, so it may extend beyond the practical mounting area in a compact van. Consider the board’s width too: a rack that holds it securely should not block lights, cupboards or roof openings.
Plan the mount around the van’s structure, not just its lining. A screw fixed only into trim or a thin panel may not provide a secure attachment. Identify suitable fixing points and use a rack designed for the vehicle and board. Space supports to hold the board without concentrating pressure, and check that straps won’t rub against its edges.
An external wall-mounted rack is another option, particularly when overhead space is occupied. It keeps the board outside the cabin, but its position must leave doors usable and storage accessible. Check how far the board projects from the vehicle and whether it’s practical in car parks, narrow lanes and low-clearance spaces.
Roof Storage Safety and Risks
A surfboard can travel on a campervan roof if a suitable rack is securely fitted and the board is restrained for the journey. Risks include loose straps, movement in the wind, low branches and extra vehicle height. Position the board so it cannot shift, check the restraints before setting off, and reassess them after stops. Roof storage also makes loading and unloading harder than using an interior rack.
Wall or van-panel mounting calls for the same care with fixing points and board contact. Before fitting, mark the proposed rack position and check it against the van’s doors, cupboards and ceiling fittings. Once installed, test access with the board in place: it should be supported without blocking everyday movement or making passengers duck around sharp hardware.
Van life and surfing: are they compatible?
Yes, surfing can fit van life when storage suits your boards and routine. Good surfboard storage in a campervan balances rack capacity with sleeping space, access to belongings and room to move around inside.
Start with the rack’s usable length and width, then compare these with each board and its protective cover. A rack that fits a shortboard may not suit a longer board, and storing several boards means accounting for their combined width. Leave enough room to lift boards in and out without catching them on seats, doors or cupboards.
Board thickness affects capacity too. Three classic surfboards are estimated to weigh 18 to 24 kilograms in total, and each is approximately 12 centimetres thick without a protective cover. A bag adds bulk, so a close-fitting rack may hold fewer boards than its bare dimensions suggest. Check that the rack supports each board without pressing fins or rails against another board.
Under-bed drawers and compartments can keep boards out of the main walkway, provided the available space suits their shape. Storage compartments in Renault Trafic, VW Transporter and Fiat Ducato vans are commonly 80 to 100 centimetres deep, 70 to 140 centimetres wide and 35 to 60 centimetres high. These measurements describe a range, not every conversion. Measure the actual opening, internal depth and any narrowing around wheel arches before planning storage.
Consider how often you’ll use the bed and other stored items. A board beneath a fixed bed may be accessible from a rear door, while a drawer can make loading easier but needs clear space to slide out. Check that you can remove the board without shifting luggage or disturbing bedding. Easy access makes surfboard storage in a campervan more practical during quick stops.
For UK journeys, secure boards so they cannot slide into the driver’s area or obstruct visibility. Insurance cover depends on the policy wording, including how it treats carried equipment and vehicle changes. Review the terms for your setup before travelling.
- Measure the rack’s usable space and boards with their bags fitted.
- Check that supports hold boards without pressing on fins or rails.
- Test under-bed access with the bed and nearby doors in their usual positions.
- Secure the load and keep the driver’s view clear before setting off.
A measured layout can make board storage work alongside sleeping and everyday essentials. Explore campervan interior layouts when planning how storage and living space should fit together.
Limited floor space and movement inside a van
A surfboard left loose on the floor can take over the route between the sliding door, seats and bed. Plan storage around how you enter, cook and sleep, rather than choosing an empty-looking gap. In a VW Transporter layout, for example, a board beside the kitchen may block cupboard access whenever you stop.
Think through a typical day before settling on a position. Picture unloading after a surf, opening the fridge, changing clothes and making the bed. If you have to move a longboard for each task, the storage plan means repeated lifting and awkward handling. Depending on the van’s dimensions and fittings, an overhead rack or under-bed compartment may keep the central walkway clear.
Keep the main route from the cab to the side or rear door clear. A board across that path can catch on bags, footwear or a seat base. Test the layout with the surfboard in its travel bag, then open every door and drawer. Check whether you can remove the board without shifting kitchen equipment or blocking access to everyday essentials.
Fixed furniture also affects the space available. A bed platform, kitchen unit and swivel seat each use room that might otherwise carry a board. Sketch these items from above, marking the board’s position and the route needed to load it. A shortboard may fit beside furniture where a longboard would cross the walkway, but the bag can change that fit.
Think about how many boards you carry and who uses the van. One surfer travelling alone may manage a temporary floor position, but passengers need clear access to seats and belongings. If you carry several boards, stack or rack them only where supports prevent movement and keep fins away from people and furniture. Don’t balance a board on a table or loose bedding.
Before a trip, load the van as you would for a weekend away. Pack bedding, cooking gear and bags, then put the board in its intended position. Walk from the cab to the bed and kitchen, open storage doors, and practise removing the board. This rehearsal can reveal snags that measurements in an empty van won’t show.
- Keep the route between the cab, sliding door and living area open.
- Test drawers, cupboards and seat access with the board loaded.
- Use the board bag when assessing clearances around furniture.
- Rework the layout if daily tasks require repeated shifting or lifting.
A layout that works on the driveway should still feel practical after a beach stop, with the board secure and the living area ready to use.

Protecting surfboards from impacts and friction
Secure each board in a fitted rack or storage system before driving, with restraints that prevent it sliding forwards, backwards or sideways. Keep it clear of the driver’s area, and gently test by hand that it stays in place.
Movement can damage the board as well as create a safety concern. A rail rubbing against a hard fitting can leave marks, while a fin pressed against another surface can chip. Add soft padding at each support point, and ensure straps hold the board without squeezing its rails. Check contact points after loading, especially near metal fittings or furniture edges.
Protect the van’s interior as well as the board. A board bag helps contain wax and loose sand, while a washable mat beneath the storage area catches drips from a wet deck. Keep fins from scraping cupboard fronts, and set aside a separate place for a damp towel or wetsuit. This keeps wet kit away from bedding and stored clothes.
After a sea session, rinse salt and sand from the board with fresh water where practical, then dry it before storing it for an extended period. For a short journey, wipe away excess water and place it on a water-resistant mat. Avoid leaving a wet board in a sealed bag for extended storage, as moisture can linger around the board and its fittings.
Wax needs attention, too. Warm conditions inside a parked van can soften it, so position the board away from upholstery, curtains and soft bags. A board sock or bag helps keep wax off surfaces, but remove loose sand first. Sand trapped between the cover and board can rub as the van moves and cause scratches; a clean, dry cover helps avoid this.
Before setting off, use this quick check:
- Confirm every strap is secure and the board cannot shift against its supports.
- Check that fins, rails and nose sit clear of hard edges and nearby furniture.
- Place a mat beneath wet equipment and keep the board away from bedding.
- Remove loose sand from the board and bag before loading them into the van.
Recheck the rack after unloading and reloading at a beach stop. A strap can loosen as you handle the board, and a damp mat may need repositioning before the next drive. These simple steps protect the board’s finish and help keep the campervan ready for the journey ahead.
Surfboard bag dimensions and van storage
Choosing a bag size isn’t as simple as reading the board’s label. The stated size may describe the board the bag suits, rather than the bag’s outside dimensions. For surfboard storage in a campervan, measure the packed bag, including its seams, handles and any fin section.
Lay the empty bag flat and measure its full length from end to end. Then put the board inside and check the widest points around the nose, middle and tail. A pointed board and a rounded board can sit differently in bags with the same stated size. Record the packed dimensions, not just the label.
Next, check how the board sits inside the bag. If the bag has a fin section, measure how far it projects and note its position. A removable fin may change the packed profile, but only remove it if the board’s design allows it and you can store the fin safely. Keep the fin and its fittings together.
Measure the available storage space exactly where the bag will sit. Interior panels, door trims and furniture edges can make an opening narrower than the van’s broadest point suggests. Use a flexible tape to follow curved surfaces and a rigid rule for straight gaps. Record each measurement so you can compare the bag’s profile with the actual space.
A full-size paper or cardboard outline can help test awkward shapes. Trace around the packed board and mark the fin area, handles and bulky seams. Move the template into position without forcing it around corners. If it buckles or catches, loading the padded bag in the same way may be difficult.
Leave room to handle the bag rather than planning a tight fit with no grip. Check where your hands can hold it, whether the zip can open, and whether straps or handles catch on fittings. Consider where the empty bag will go, too: even folded, it needs a place that won’t obstruct other equipment.
- Use the packed bag’s outside dimensions, not its board-size label alone.
- Record the nose, centre, tail and fin-area profile.
- Test a full-size template against the intended space and loading angle.
- Leave room to grip the bag and use its zip without snagging.
Planning your campervan layout around your board bag can help keep the fit practical for everyday use.
Route 300 Campers
Route 300 Campers can help you choose a campervan or plan a layout around surfboards and everyday living. If you’re comparing vehicles, consider how board length, bag size and storage position fit alongside sleeping space and kitchen access. For an existing van, a full campervan conversion can be planned around the way you travel, with storage and living areas considered together.
Route 300 Campers offers VW T7 Campervans, Used Campervans and Full Campervan Conversions, as well as Campervan Kitchen Units. The right starting point depends on whether you’re choosing a vehicle or shaping a conversion around your own routine. Share how you travel and what boards you carry to begin a practical conversation.
Contact Route 300 Campers to discuss your campervan plans.
Plan a van that fits your surf routine
Planning surfboard storage in a campervan is also a chance to shape how the whole vehicle works for you. Think beyond where the board goes: consider how you’ll load it after a session, where wet equipment will go and how you want the living space to feel on longer trips. Those choices can help guide your next vehicle or conversion decision.
Route 300 Campers offers VW T7 Campervans, Used Campervans and Full Campervan Conversions. These options give you different starting points, whether you’re choosing a ready-to-drive vehicle or planning a conversion around the way you travel. Bringing your board and bag measurements into that conversation can help keep your surfing routine in view as the layout takes shape.
Contact Route 300 Campers to discuss your campervan plans. With a thoughtful layout, the road to your next surf can feel just as rewarding as the time spent in the water.
Frequently Asked Questions
What are the best ways to store surfboards inside a campervan?
A dedicated rack or compartment is usually more practical than leaving the board as loose luggage. Choose a setup that suits the number of boards you carry and how often you remove them. For several boards, keep them separated rather than stacking them directly together. Store fins, a leash and small repair items in a labelled pouch to keep accessories organised and away from the board.
How do you fit a surfboard rack or ceiling mounts in a campervan?
Follow the rack manufacturer’s fitting instructions and use the specified fixings and components. Before installation, identify the vehicle structure and avoid drilling where hidden wiring or fittings may be. If you’re unsure about a mounting point or panel construction, have a qualified installer assess the fitting. Once installed, check the rack’s stated load limits and inspect its fixings periodically, particularly after travelling on rough roads.
What surfboard storage options work for different campervan layouts and board sizes?
Match the arrangement to the number of boards, your access needs and the furniture already fitted. A single board used daily is easiest to manage in a position you can reach without unpacking other kit. If you carry several boards, plan how to remove each one independently. A removable divider or separate padded supports can help keep boards apart, while a dedicated accessory pouch keeps fins and tools from becoming loose in cupboards.
How can you prevent surfboards from being damaged by heat, pressure or movement in a van?
Keep heavy luggage, camping equipment and loose accessories off the board, even inside a padded bag. Remove detachable fins and leash hardware if they could press against the deck during travel, then store them together in a small pouch. Don’t tighten restraints over raised fittings or concentrate pressure in one spot. A quick check after loading can catch anything trapped beneath the board before you set off.